A Curious Christmas Basset
Here’s a curious little basset hound that would love to have a friend. It’s all lonesome by itself, but if you make one (or two, or three) you’d have a happy pack of hounds that would love to find a home on your Christmas tree!
Supplies & Tools:
- Printable template (download here)
- Brown felt
- Tan felt
- Embroidery floss: black, brown, tan
- Mini hot glue gun
- Hot glue sticks
- Embroidery needle
- 1/8″ brown ribbon
- Print the template and cut out pieces.
- Use marker to trace template pieces on felt. Cut out 2 pieces of each shape.
- Whip stitch the ears onto each body piece. I separated the strands of embroidery floss and used 2 strands to sew the ears.
- Make the eyes:
- Using a full (6-strand) piece of embroidery floss, pull thread through the felt, to the front side of the dog. (I didn’t tie a knot on the back. We’ll do that in a second.)
- Tie a knot in the thread. Don’t pull it too tight, you want the knot to be a little loose.
- Pull the thread to the back. See how the knot makes a cute little eye?
- Flip the dog over, tie the ends of the thread, and trim.
- Repeat for other piece.
- Sew a brown spot onto each body piece.
- Cut a piece of ribbon that is about 10″ long. Fold in half and tie the ends in a knot.
- Glue the knot onto the reverse side of one of the dogs, near the neck. Be sure to glue the knot at least 0.25″ from the edge of the felt. (We’ll need that space to sew the pieces together in just a minute.)
Note: If you are tempted to glue the ribbon in the middle of the dog’s back (like I was), don’t do it! If you do, the dog will be lopsided when you hang it on the tree.
- Now stack the 2 dog pieces together and begin sewing. I used 3 strands of tan embroidery floss. I started sewing at the base of the neck, and then continued sewing around the head, legs, and tail.
- Once you have sewn about 3/4 around the dog, stuff with Poly-Fil®. I stuffed the dog, a little at a time, using a mini glue stick to push the fluff into the legs and head.
- Continue sewing the felt together. Once you reach the first stitches, tie off the thread and hide the ends inside the doggie. (How? Glad you asked. Click here.)
- To add the nose, we’ll use a full (6-strand) piece of black embroidery floss. Cut a piece that is 12″ long. Tie one end of floss in a knot.
- Stick the needle in between the layers of the felt at the tip of the dog’s face.
- Begin sewing loops around the edges of felt to make the nose.
- After you’ve sewn a few loops, insert the needle between the layers of felt, thread the needle with the short ends of floss, and pull the needle through the dog. Do this to hide the ends of the floss. (I didn’t tie the ends of the floss since the loops were fairly tight, but you may prefer to tie them—your choice.)
- Continue sewing a few more loops until you’re happy with how it looks. To finish the nose, stick the needle through the tip of the nose into the dog’s face. (Similar to the previous step.)
- Pull the needle & thread though the dog’s body and trim the thread.
- Now your adorable basset ornament is complete!
Ideas from the elves:
- A little piece of fabric tied around its neck looks like a bandana.
- Spread Christmas cheer with a little jingle jangle of a mini sleigh bell.